What to do if your ipega PG – 9083 retractable Bluetooth game controller isn’t working?

Home › What to do if your ipega PG – 9083 retractable Bluetooth game controller isn’t working?
What to do if your ipega PG – 9083 retractable Bluetooth game controller isn’t working?

GamePad Mode: Only Android 3.2 + versions supports this mode, when the handle turn-off, first press the “X” key, then press the HOME key, Bluetooth LED indicator flash, the handle enter into the pairing mode, turn-on the phone and search for Bluetooth devices “ipega gamepad controller” and pairing, if the pairing is …

Q. How do I use my Ipega controller?

For all of the models – the general process is as follows:

  1. Place the gamepad into the desired pairing mode.
  2. Connect the device to the system as you would any other Bluetooth gamepad (Note: The 9156 will automatically connect when you use the 2.4GHz dongle)
  3. Once the LEDs stop flashing, your gamepad is now connected.

Q. How do I set up Ipega 9017?

GamePad Mode: Only Android 3.2 + versions supports this mode, when the handle turn-off, first press the “X” key, then press the HOME key, Bluetooth LED indicator flash, the handle enter into the pairing mode, turn-on the phone and search for Bluetooth devices “ipega gamepad controller” and pairing, if the pairing is …

So here I will use the Honor Play to setup and try on the PUBG.

  1. Switch on the game pad on/off switch.
  2. Hold the “Home” button and “X” button for 2 seconds (this is only for Android)
  3. You will see the 4 LED blinking if it is switch on.
  4. Turn on your phone Bluetooth and pair with it (default name : PG-9087)

Q. How do I reset my Ipega 9023?

Please use the needle press the RESET button on the back of Gamepad for 5 seconds. Please be reminded don’t touch other buttons while Bluetooth pairing.

Q. How do I use Ipega 9087?

Use of Android Device

  1. Press and hold X button and-Abutton for 2 seconds at the same time, 4 LED indicator lights will blink simultaneously in a rapid manner at this moment.(Picl)
  2. Open the Bluetooth on Android device, click searching.(Pic2)
  3. Find and select “PG-9087” for Bluetooth pairing.(Pic2)

Q. How do I reset my Ipega controller?

Q. What should I do if I have a problem with ipega pg-9099?

For Gearbest customers: If you’ve purchased iPEGA PG – 9099 Bluetooth Gamepad from us and still have problem after reading the user manual, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us.

Q. How do I connect my ipega controller to my iOS device?

You just need to pair your IPEGA remote Bluetooth gamepad controller with your device. Turn on the controller by pressing B + Home button simultaneously and wait for the red LED indicator to blink. Go to your iOS device, then press Settings – Bluetooth. Swipe your Bluetooth to enable it.

For Gearbest customers: If you’ve purchased iPEGA PG – 9083 Retractable Bluetooth Game Controller from us and still have problem after reading the user manual, please do not hesitate to get in touch with us. Just fill in the ticket with your questions at our Support Center and send it to us.

Q. What is the specification of the ipega pg-9025?

Here are some of important details and specification of PG-9025: BATTERY: This device uses a built-in lithium battery where you can easily charge anytime through USB. The IPEGA remote Bluetooth gamepad charging time is up to 2-hours and can be used to at most 20 hours game time or 100 hours if on stand-by mode.

Randomly suggested related videos:
IPEGA PG-9083S Bluetooth Gampad Setup Turtorial for Android / iOS / Windows PC

Purchase Now from:Shophappily.com:https://bit.ly/3jPkQiVAmazon.com:https://amzn.to/3jyskIZAmazon.ca:https://amzn.to/3uEfcZqAmazon.co.uk:https://amzn.to/3O7r6…

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *